Kaydol

Flood göndermek, insanların floodlarını okumak ve diğer insanlarla bağlantı kurmak için sosyal Floodlar ve Flood Yanıtları Motorumuza kaydolun.

Oturum aç

Flood göndermek, insanların floodlarını okumak ve diğer insanlarla bağlantı kurmak için sosyal Floodlar ve Flood Yanıtları Motorumuza giriş yapın.

Şifremi hatırlamıyorum

Şifreni mi unuttun? Lütfen e-mail adresinizi giriniz. Bir bağlantı alacaksınız ve e-posta yoluyla yeni bir şifre oluşturacaksınız.

3 ve kadim dostu 1 olan sj'yi rakamla giriniz. ( 31 )

Üzgünüz, Flood yazma yetkiniz yok, Flood girmek için giriş yapmalısınız.

Lütfen bu Floodun neden bildirilmesi gerektiğini düşündüğünüzü kısaca açıklayın.

Lütfen bu cevabın neden bildirilmesi gerektiğini kısaca açıklayın.

Please briefly explain why you feel this user should be reported.

Windows storage spaces will not let me remove a retired drive

I’m going a bit insane trying to fix this issue with my file server it’s a plex server with some files built on windows 10 using parity. I had 6 drives and 1 failed, storage spaces would not let me remove the drive, I would get a lack of resiliency error, so I added another drive… Same error… so I added another… Now I’m broke and still can’t access my data. I physically removed the dead drive as it seemed to be causing windows to take 30+ mins to boot.
[https://ibb.co/mh8Cfxx](https://ibb.co/mh8Cfxx)

[https://ibb.co/G97bJpN](https://ibb.co/G97bJpN) When I try to remove or repair the pool in powershell nothing happens (see pics) it just says job suspended… I don’t know what to do, but really need a few of the files back, my wife stored her school stuff on there.
Thank you (sorry if I formated this poorly, my first time on superuser)

Benzer Yazılar

Yorum eklemek için giriş yapmalısınız.

3 Yorumları

  1. https://ibb.co/8sWCrbJ

    Plugging the dead drive back in and restarting the system 3 or 4 times, randomly allowed me to remove the drive (I think because the drive only randomly died)

    I still don’t understand what happened, but glad it’s back to life.

    Will start migrating to Linux.

  2. It will not let you remove it without a spare. What I did, before completely abandoning storage space, was to physically disconnect the failed disk and then look up powershell commands to fix the mess.

  3. 1. The drives you added to replace must be 8tb or larger based on your largest drive size due to how storage spaces handles the layout or you’ll get sone oddbal failures (not the one your getting though you have a syntax error in your ps)
    2. The “<zombie>” – is your array name zombie? If yes it should be “zombie” not “<zombie>” or whatever “array” is named. I.e remove the <>.
    3. Put the dead drive back in until you have successfully removed it correctly. Boot time doesn’t matter if you can’t get the array back online right?