Kaydol

Flood göndermek, insanların floodlarını okumak ve diğer insanlarla bağlantı kurmak için sosyal Floodlar ve Flood Yanıtları Motorumuza kaydolun.

Oturum aç

Flood göndermek, insanların floodlarını okumak ve diğer insanlarla bağlantı kurmak için sosyal Floodlar ve Flood Yanıtları Motorumuza giriş yapın.

Şifremi hatırlamıyorum

Şifreni mi unuttun? Lütfen e-mail adresinizi giriniz. Bir bağlantı alacaksınız ve e-posta yoluyla yeni bir şifre oluşturacaksınız.

3 ve kadim dostu 1 olan sj'yi rakamla giriniz. ( 31 )

Üzgünüz, Flood yazma yetkiniz yok, Flood girmek için giriş yapmalısınız.

Lütfen bu Floodun neden bildirilmesi gerektiğini düşündüğünüzü kısaca açıklayın.

Lütfen bu cevabın neden bildirilmesi gerektiğini kısaca açıklayın.

Please briefly explain why you feel this user should be reported.

Cloning/Replacing an internal HDD with an internal SSD?

Hello!

My 1TB internal hard drive, which is several years old now, has been declining in performance, so I installed CrystalDiskInfo and found that it is in danger of failure soon. (My current E Drive, a 500GB SSD I bought last year, is working just fine.)

I’m looking to replace it with a 2TB internal SSD, and was wondering if it would be possible to do so, and if there was then a way to clone the old HDD onto the new SSD so I don’t lose any installed programs or saved files.

If so, is there any information I should verify about both drives before making the purchase? Is there any additional software/hardware required to do so? Is it possible to run both the 2TB SSD as the new C Drive and the current 500GB SSD E Drive together?

I would appreciate any help that you can provide!

Benzer Yazılar

Yorum eklemek için giriş yapmalısınız.

4 Yorumları

  1. If you are sticking with SATA, you just need to clone the drive. Others have suggested good software, but you could also run a backup/restore using Windows Backup and Restore.

    If your motherboard supports it, you could also upgrade to NVMe, which is much higher performance- but it may not be a simple clone.

  2. Many ssds come with free software to clone the drive, however, I am partial to mini tools partition wizard. An hdd dock or sata to usb cable is something you’ll need to connect the ssd to the laptop to clone to. I’ll warn you that the acronis software that comes with crucial ssds is junk, the last laptop I upgraded an ssd, it took almost 2 hours to get through the cloning wizard for it to fail, and it did this 3 times.

  3. Upgrading your PC by replacing your HDD with an SSD is pretty common. There are tons and tons of very good tutorials out there and it is not hard at all to find them.